air zenith compressor what relay

just needing to know what relay to put on 2 air zenith compressors,,,,please help

stinger SR-80 solenoid

it'll hold 80 amps, and make sure you get some stout ass wire that will hold the same amp draw

do i need a relay for each compressor?or can i just run the 2 compressors off of 1.thanks

probably be a good plan to get a relay for each.

what if i get a 200 amp stinger relay?

get some inline fuses too.

what kind of inline fuses,what amp,,where do i need to put them.

im running one air zenith with an 85 amp cont. duty solenoid from napa i got an 85 amp justin case i wanted to run two it sould be enough. also im running #4 wire from the bat. to a block with a 100 amp fuse in line to protect it from a direct short from the block to the solenoid i ran a #8 which is almost a foot plus the ground and a switch to turn the comp on and off manually. havent had any problems yet and it my daily

100 amp circuitbreaker.I blew my 80 amp fuse and no probs with the breaker.... I also have two...

wow i don't even think my alt puts out 80 amps damn those suckers draw some current