back half progress pics!!
i cut it
+1y
dunno how to post pics look in my profile srry.
Http://www.streetsourcemag.com/Profile.aspx?profileid=40754
Http://www.streetsourcemag.com/Profile.aspx?profileid=40754
i cut it
+1y
my fuel cell from seriously insane auto should be in tommorrow and my 20 22 combo!
i went with the new u2 wheels.
the 22 has a 6inch chrome lip with 3 more inches of chrome lip behind that! there sick
i went with the new u2 wheels.
the 22 has a 6inch chrome lip with 3 more inches of chrome lip behind that! there sick
BB
bill brasky
+1y
You welding it with fluxcor?
i cut it
+1y
yup! i cant get anybody 2 come out and hook up my 220 for my big welder..?
Y
yougurt
+1y
EEK! Fluxcore!
No shielding gas?
Use the dryer outlet with an extension cord.
No shielding gas?
Use the dryer outlet with an extension cord.
91 drggn dime
+1y
Originally posted by yougurt
EEK! Fluxcore!
No shielding gas?
flux burns hotter, its just nastier to clean up. so he's alright using it, just have to make sure its all cleaned off or it will let water behind the weld..
Use the dryer outlet with an extension cord.
EEK! Fluxcore!
No shielding gas?
flux burns hotter, its just nastier to clean up. so he's alright using it, just have to make sure its all cleaned off or it will let water behind the weld..
Use the dryer outlet with an extension cord.
BodyDragginGMC
+1y
110 Flux core?? Dude, redo that shit. Killer idea but make it safe. We don't need anymore minitruckers lost.
97hrdbdy
+1y
the bigger 110 welders will penetrate 3/16-1/4 with flux core without any problems (miller 135 for example)
Low_SST
+1y
but it is a porous and weak weld and can be broken because penetration isnt even in most cases.
Low_SST
+1y
hey i would also check out the 4 link on the pumpkin, if my memory is correct that piece is cast and welds on cast can break if the piece isnt preheated.