I WANAN SEE THESE PICZ MAZ2LOW LET ME NO WHEN U HAVE THEM UP

how hard was the swap and what do you need to do it!!!tag me back,later

your maz sounds sweet put up some pics,how did u get the v-8 to clear stock hood??,new oil pan?my oil pan is 1/2inch off the ground and i still had to make a new hood

a maz2low hit me up about the bd direction yllib89@hotmail.com oh!!!!!! ya tagged ya

who cares about the v-8 crap, the front end is sweet though

These are really old pics new ones this week maybe

finally some pics,front end looks sweet,later

great ryde man let me see some pics of the setup or will you be home before then wait when are you comin back to canada peace

Looks sweet. What headers are you running? I've been thinking about a set of Sanderson's blockhuggers but they are pricey.

hey fat truck man how did you do that front thing. heard your doin a civic too............ha ha ha

Hey whats up nice truck. I also have a b2200 and was wondering how did u do your motor swap?? did they make engine mounts? hit me back @ doan51@hotmail.com thanks.

Lookin good.

hey man its nice to see the truck keep it coming

Phat....cant wait to see it done

That front end is the dopest thing ive ever seen, how hard would it have been to include the cowl? It would be phat if you made what was left of the bottom fenders in to little compartments for enigine shit. If you could email me at B_diddy_33@hotmail.com on how hard it was to do this mod and how you did it that would be awesome, cant wait to see it done.

hit me up on how to do the tilt front end, i wanna do that

thats badass man....where ya from? hit me back

Truck lookin BadAss keep it up L8r

Tagged By BAGGIN........

nice ride

what up man just taggin ya back i really like you shit you need to get some new pics so i can admire it even more cya lates

dam that shits gunna b sicc as fuck when its done, tag me back bro, nice truck

WEAPONS OF MASS CONSTRUCTION

Nice to meet you.It is doing its best very hard. see ya.

so slick man whered you get your motor mounts tag me back with the answer

Fukn sick man, can't wait to see it all done!!!I'm lovin' the front cap !!

looks like itll be way sick when it is done. keep at it

sweeeeeeeeet ride bro keep on draggin.

tilt front fuck sweet shits lookin good

Hey is the maz going to be at blood drag in florida?

nice ride ...........ES........

Though it found out recently, B2200 is being made by the name of FORTA in China at present, too.

you gotta love a V8 mini!!! thanks for the tag, i have been in school 1500 miles away from my truck since augest so thats why theres a lack of updates, i cant wait to get back and finish the damn thing. your trucks lookin sweet with that front end cant wait to see it finished, later

do you have hood clearence problems? i put my motor down as far as i could and i still have a shitload of it stickin out, just wondering

just tagging hit me up later man

bad ass truck hope to see you at indy

phat truck....

tagged by me. hahahahahahahahahahahahahahahaha tag me back :o)

sweat ass truck dude. tag.

tag looks sweet! that is what I want to do. My question is I see that you did not cut your front crossmember mine is lowered 1 1/2" so can I do the same set up as you, also how did you mount the bumber to the front?

nice project! love the hood!

aww shit another dawg on juice! keep it real!

nice ride just woundering how the truck is doing and if you changed the rear end yet.......Tag me back

nice motor man shit is comming along

FREAKFEST 2003 JUNE 27,28,29 FORE NORE INFO GO TO WW.FREAKFEST2003.COM

looks like your gonna have a deadly ride when its done, tag me back

nice job on the engine, and the front end thing is sweet.. killer mazda

how the hell do yo even drive that boddydroped beast. damn that shit was dope though

damn a bodydropped dawg with a 350 and some twanky's? that's just nuts...

KOWL

got engine?

Hey man thanks 4 the tag..I like that front clip...I'm in Daytona Beach I would like that painters info E-mail me at bagginissan@aol.com or just hit me back with it....Thanks Bro

SIIIIIIICK!

Hey maz2low did you get those ne wpics yet of it laid out on Dubs let me know

yo man thats a sick truck did you have toi move your mater cylinder when u dropped the 350 in leme know tag me back. later

looks really good!!!! Hows everything workin out???

very sweet, tag me back

DOPE

lookin at your truck makes me wanna go work on mine

getsome pics of your floor inside during bodydrop process Nice mazda

sweet ride!

sweet ride dude just taggin the g book later...tat2

very nice mazda, luv the bedwork, l8r

awesome motor swap and front end work!! nice bed also. see ya tag me back

JUS TAGGIN YA

hey bro nice ride if u want to join a club or whereever ur at make another chapter me and my buddy started SOCIETY OUTKAST and we want to start makin it bigger so if u are interested try to get a hold of my well later bro and good luck with ur ride

TAG! YOU'VE BEEN TAGGED BY A CHICK MINITRUCKER!!!!!! :)

Damn Cory that Dawg is lookin deadly you know when your comin back yet

hey man thanks for the tag. For the truk i paid 1200 saftied. Too much in the long run kinda got ripped off. Saw the truck while i was in Oakville visintin with a bud, liked it. Bought it went to go get it it was fuckin dented , shit was taken off, paint was peeling, gas tank pissed out gas, to much shit to list its been a pain in the fuckin ass but 8months of hard work has made it into a nice truck, a bodydrop is next with a cut thru for hte subs

very sick maz, hit me back

is your upper and lower control arms stock?

nice ride.tag

damn that has to be one of the craziest mazdas out there keep up the good work and i cant wait to see pics when its finished. www.vertically-challenged.com

thanks for the tag. your shits off the hook bro.

your shit looks clean. just draggin and taggin through. check out my rear end. its not an rx but i like it. later

looks bitchin dude

lookin good

nice work on the bed...tag me back..............drag till it hurts

You've been bagged dragged and tagged ... nice riz man!!

i like how the bed is turning out.

Truck looks dope man!!! Sinfull Creations ... Ontario, Canada

tight flip frontend im working on the same design with my new frontend i had it on my old frontend check it out if you get a chance

HAPPY THANKSGIVING!

May all of your holiday wishes come true. Merry Christmas. See Ya!!

TAGGED

DAMN!! 20's? .. how are you finding the whole turning thing, with them on? what kind of susp setup you got on the front? later mate ... james

nice bed!!!!trucks lookin good!

gonna look really good. keep up the great work.

yeah man thats looking badass with the 20's, nice job

Sup man looks like you got quite the project going on over there.Like they say go big or go home and it seems like your doing just that keep up the good work. Tag me back some time.

Hell yah man, that thing is pimp. Tag me back some time. Later.

phat as truck like the 20s....did u have to do any work too the hood to keep the 20s in there???????? and is your shit BD?????????/

How far above the tires are you getting with the suspension locked up?

NIe project you got goin there. but..........UPDATE THE PICS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!NOW!

whens this focker gonna be done man? looks killer!

looks great

looks good man cant wait to see it close to being done

nice dawg

nice

love the tilt frontend~ (it's pimped out all the way) hit me back

Just “sniffing” around. HAPPY HALLOWEEN!! See Ya!! Click

Just “sniffing” around. MERRY CHRISTMAS. See Ya!! Click

hey man i was just wondering if you have any updates on your truck wanna see it done. any pics?????

sick ass truck, those rims are tucking nice!!! 2010 huh, thats about the same time ill finish my truck..... maybe, actually probably not. later!!!

just awesome 350 and 20's making a bad mazda.

looks tight

sweet man !!!!!!!!! tag me back sometime

sick ass ride!

tag

looks awsome! what kinda cowl is that from? just a chevy style cowl that you glassed on? or something else?

looking sweet

TAGGED hit me back

sweet ride, love the small block power in a mini.

I wish I could afford a rx-7 rear end just so my rims would fit inside my bed. I like the tilt front and custom core support realy nice. :VTC:

nice dawg!!!!

nice work in your bed there man - looks neat.

looks good! what color is it???

Looks great dude that's a nice color.

woah!!! i'm jealous!!

paint looks good man

loveing the line x'd engine bay.. sick as fuck

Can you tell us what color your truck is??? Thanks...Jeff

Truck looks sweet.. the blue looks awesome...

truck is lookin sic man. you think have enough room between the hood and tire?

like the color

^^^^^^^^^ what he said. that color is bitchin' bro.

Looks fucking sick as shit man

I like that !!! I plan to do same . I just need to know how you converted the front to the four lug? Did you use the stuff off of the rx-7? hit me up on rcgarcia004@yahoo.com

i like the color, it looks like my 63 chevy c10.

sick bro...looks good

thats 1 sexy bitch!

lays pretty hard, clean truck man!!!

whats up mada lookin sikk, i just decided thats not what i wanted and put the motor in my girl's dime we werkin on

SIK

Lookin good. Clean truck

cool!

I dont think you need to get lucky, I believe its due for a feature myself, very nice mazdawg

your truck will definately make a magazine. would you be interested in making a sub and amp inclosure for me?

feature for sure! I've been watching this thing for years

love the color,,,what is that,,blue???jk,,,more pics!!!!

lovin it

BAD ASS!

That blue is sick!!!

Ur Mazda is badass!

love the mazda it is beautifull. Do you have any recent pictures?

tight ride man, i wanna see more pics

Clean truck

clean ass mazda that blue is sweet

It's still BADASS!

Sick Mazda, love the hood