Edited: 1/31/2012 9:06:14 PM by pugz

Edited: 8/12/2011 6:53:58 PM by pugz

Edited: 9/7/2010 7:48:19 PM by pugz

Edited: 5/31/2010 9:53:26 PM by pugz
Edited: 5/31/2010 9:52:52 PM by pugz
Edited: 5/16/2010 9:07:39 PM by pugz
ok heres my start so far. its a 94 pathy 4door being stock floored on 22" billets being built at McClary's Metalworks (formally the house of hack) in Bay Minette, AL. 

ok , on to the pics.....

before


heres the start .... most of my frame design and measurments...



now cutting the frame rails... yeah, this took forever.... but bandsaws are great, they cut slow for extended blade life and cut straight .. very straight..



heres parts of the frame rails ..




heres a layout of the frame rails soo far...

for those that havent seen these pics before. heres all the parts mat's going to be using on the build.

F-O-A reservoir shocks on the rear. and non res ones up front. (still gotta get the fronts) and heims for the upper control arms



ballistic fabrication 2.63" heim joints for the rear link setup.



dominator 2600 bags front and back and aluminum 5 gallon tank



raceline 20" billets



accuair switch speed controller



also will be running accuair valve manifold. mat has my belltech spindles for it but i dont have any pics of them. will be running dual viair 444s.